Reset_Server Parameters; Reset_Server Errors; Press_Pwr_Btn; Press_Pwr_Btn Parameters - HP Integrated Lights-Out User Manual

320 User Guide Integrated Lights-Out

RESET_SERVER Parameters

None

RESET_SERVER Errors

The possible RESET_SERVER error messages include:

PRESS_PWR_BTN

This PRESS_PWR_BTN command is used to toggle server power. For this
command to parse correctly, the PRESS_PWR_BTN command must appear
within a SERVER_INFO command block, and SERVER_INFO MODE must be
set to write. The user must have the virtual power and reset privilege to execute
this command.
Example:

PRESS_PWR_BTN Parameters

There are no parameters for this command.
Server information is open for read-only access. Write access is required for
this operation.
Server is currently powered off.
User does NOT have correct privilege for action. RESET_SERVER_PRIV
required.
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<SERVER_INFO MODE="write">
<PRESS_PWR_BTN/>
</SERVER_INFO>
</LOGIN>
</RIBCL>