Launching Hpqlomgc Using Application Launch - HP Integrated Lights-Out User Manual

218 User Guide Integrated Lights-Out
To implement directory support on a few management processors.
1. Use Insight Manager 7 or Systems Insight Manager to locate all of the
2. Execute the HPQLOMGC utility.
3. Invoke the XML file to migrate the management processor.
HPQLOMGC goes through three phases to complete the migration of a
management processor.
1. The firmware version is validated and updated if necessary.
2. The management processor directory settings are updated.
3. The directory is updated.

Launching HPQLOMGC Using Application Launch

Application Launch can be used to create tasks associated with administration of
management processors. For example, the management processors can be
discovered using Application Launch and could be used to automatically
configure new management processors as they are added to the network.
IMPORTANT: Installing directory support for any management
processor requires downloading the HP Smart Component. Refer to the
"Pre-Migration Checklist (on page 206)" and the "HP Lights-Out
Directory Package" sections for additional information. Extending the
schema must be completed by a Schema Administrator.
management processors in the network.
HPQLOMGC determines the type of management processor and the
firmware level. If the firmware does not meet the minimum requirement
("Upgrading Firmware on Management Processors" on page 210),
HPQLOMGC upgrades the firmware and resets the management processor.
After the management processor resets, HPQLOMGC begins the next phase.
HPQLOMGC uses the scripting interface to send the directory settings to the
management processor.
HPQLOMGC creates a device object in the directory at the location specified
by the user. HPQLOMGC uses either the object name specified in the XML
file or the network name of the management processor. After the device
object is created, the specified role object is then amended to include the
newly created device object.