Ilo Does Not Respond To Ssl Requests; Testing Ssl - HP Integrated Lights-Out User Manual

394 User Guide Integrated Lights-Out
8. Press the Enter key to reprogram another device, or press the Esc key to
It might be necessary to set the Security Override Switch to perform the
ROMPaq upgrade. The ROMPaq program informs you if the Security Override
Switch must be set.
If none of the above solves the issue:
1. Remove the power from the server and the system battery.
2. Wait a few minutes.
3. Replace the battery, and power to the server.
This may return iLO to the default state.

iLO Does Not Respond to SSL Requests

iLO does not respond to SSL requests when a Java™ warning appears. If a user
is logging into an iLO browser connection and does not complete the login
process by responding to the Java certificate warning, iLO does not respond to
future browser requests. The user must continue the login process to free the iLO
Web server.

Testing SSL

The following test checks for the correct security dialog prompt. A non-working
server will proceed to a Page cannot be displayed message. If this test
fails, your domain controller is not accepting SSL connections, and probably has
not been issued a certificate.
1. Open a browser and navigate to <https://<domain controller>:636.
return to the A:\ prompt.
You can substitute <domain> in place of <domain controller> which goes
to the DNS and checks which domain controller is handling requests for the
domain. Test multiple domain controllers to verify all of them have been
issued a certificate.