Ilo Shared Network Port; Ilo Shared Network Port Requirements - HP Integrated Lights-Out User Manual

Feature
Language
Client/User authentication method
Authentication timeout
Authentication attempts
Default SSH port

iLO Shared Network Port

The iLO Shared Network Port enables you to choose either the system NIC or
the dedicated iLO NIC for server management. Both regular network traffic and
network traffic intended for iLO pass through the system NIC when this feature
is selected. The iLO Shared Network Port is only available on a limited number
of ProLiant servers, as shown in the "iLO Shared Network Port Requirements
(on page 125)" section.
Not all iLO management features are available when using the iLO Shared
Network Port. Refer to the "iLO Shared Management Port Features and
Restrictions (on page 126)" section for a list of supported and unsupported iLO
management features.

iLO Shared Network Port Requirements

The iLO Shared Network Port feature is only available on servers with hardware
that supports this feature. In addition to the hardware, both the NIC and iLO
firmware must support the feature.
ProLiant Server
DL360 G4
DL380 G4
ML370 G4
When using the iLO Shared Network Port, flashing the iLO firmware through the
XML interface will take approximately 7 minutes to complete.
English
Password
2 minutes
3
22
Minimum iLO firmware version
1.60
1.60
1.60
Using iLO 125