HP Integrated Lights-Out User Manual page 292
Hp integrated lights-out user guide
Hide thumbs
Also See for HP Integrated Lights-Out:
- Technology brief (24 pages) ,
- User manual (205 pages)
Table of Contents
Advertisement
292
User Guide Integrated Lights-Out
DNS_NAME is used to specify the DNS name for the iLO. If an empty string is
entered, the current value is deleted.
DOMAIN_NAME is used to specify the domain name for the network where the
iLO resides. If an empty string is entered, the current value is deleted.
DHCP_GATEWAY specifies if the DHCP-assigned gateway address is to be
used. The possible values are "Yes" or "No." It is case sensitive. This selection is
only valid if DHCP is enabled.
DHCP_DNS_SERVER specifies if the DHCP-assigned DNS server is to be used.
The possible values are "Yes" or "No." It is case sensitive. This selection is only
valid if DHCP is enabled.
DHCP_WINS_SERVER specifies if the DHCP-assigned WINS server is to be
used. The possible values are "Yes" or "No." It is case sensitive. This selection is
only valid if DHCP is enabled.
DHCP_STATIC_ROUTE specifies if the DHCP-assigned static routes are to be
used. The possible values are "Yes" or "No." It is case sensitive. This selection is
only valid if DHCP is enabled.
REG_WINS_SERVER specifies if the iLO must be register with the WINS
server. The possible values are "Yes" or "No." It is case sensitive. This selection
is only valid if DHCP is enabled.
PRIM_DNS_SERVER specifies the IP address of the primary DNS server. This
parameter is only relevant if the DHCP-assigned DNS server address feature is
disabled. If an empty string is entered, the current value is deleted.
SEC_DNS_SERVER specifies the IP address of the secondary DNS server. This
parameter is only relevant if the DHCP-assigned DNS server address feature is
disabled. If an empty string is entered, the current value is deleted.
TER_DNS_SERVER specifies the IP address of the tertiary DNS server. This
parameter is only relevant if the DHCP-assigned DNS server address feature is
disabled. If an empty string is entered, the current value is deleted.
PRIM_WINS_SERVER specifies the IP address of the primary WINS server.
This parameter is only relevant if the DHCP-assigned WINS server address
feature is disabled. If an empty string is entered, the current value is deleted.
Advertisement
Table of Contents
Troubleshooting
