Logging In To Ilo For The First Time Using A Browser - HP Integrated Lights-Out User Manual

40 User Guide Integrated Lights-Out

Logging in to iLO for the First Time Using a Browser

To start the login process, you must know the iLO network address, which is
either the DNS name, or the iLO IP address. You can determine the iLO IP
address using iLO RBSU (on page 22).
The Show iLO IP during POST configuration option, sets iLO to display the
assigned IP address while the host is booting.
1. Enter the iLO IP address or DNS name using the address bar of the Web
DNS Name—ILOXXXXXXXXXXXX, where the 12 Xs represent the serial
number of the server
NOTE: User names and passwords are case sensitive.
browser.
NOTE: This procedure assumes that your network supports
DNS/DHCP. If not, you must configure the IP address using the RBSU
or, for ProLiant BL p-Class servers, through the iLO Diagnostic Port.
When connecting to iLO in a browser for the first time, you will receive a
security alert. This alert appears because the default SSL certificate that is
dynamically generated by iLO is not known to the browser.
Refer to "Certificates (on page 140)" to import a certificate generated by a
CA.