Batch Processing Using The Lights-Out Configuration Utility; Lights-Out Configuration Utility Parameters - HP Integrated Lights-Out User Manual

Batch Processing Using the Lights-Out
Configuration Utility
Group Administration can also be delivered to iLO through batch processing.
The components used by batch processing are the Lights-Out Configuration
Utility, an RIBCL file, and a batch file.
The following example shows a sample batch file that can be used to perform the
Group Administration for iLO:
The Lights-Out Configuration Utility overwrites any existing log files.

Lights-Out Configuration Utility Parameters

If you click Schedule, the schedule task screen appears. Schedule the
task. For more information on the scheduling options, see the HP
Systems Insight Manager documentation.
The Schedule option is available only if the tool can be scheduled.
If you click Run Now, the Task Results screen appears with a summary
of the task, the target details, and the status.
REM Updating the Integrated Lights-Out board
REM Repeat line for each board to be updated
REM
CPQLOCFG -S RIB1 -F C:\...SCRIPT.XML -L RIB1LOG.TXT -V
CPQLOCFG -S RIB2 -F C:\...SCRIPT.XML -L RIB2LOG.TXT -V
CPQLOCFG -S RIB3 -F C:\...SCRIPT.XML -L RIB3LOG.TXT -V
.
.
.
RIBNLOG -S RIBN -F C:\...SCRIPT.XML -L LOGFILE.TXT -V
-S is the switch that determines the iLO that is to be updated. This switch is
either the DNS name or IP address of the target server.
Do not use this switch if you are launching from Insight Manager 7 or
Systems Insight Manager. Insight Manager 7 and Systems Insight Manager
will provide the address of the iLO when CPQLOCFG.EXE is launched.
Group Administration and iLO Scripting 247