HP Integrated Lights-Out User Manual page 369

Event Log Display
Security Override Switch Setting
Changed to Off
On-board clock set; was previously
[NOT SET]"
Logs full SNMP trap alert failed for: IP address
Security disabled SNMP trap alert failed for:
IP address
Security enabled SNMP trap alert failed for: IP
address
Virtual Floppy connected by User
Virtual Floppy disconnected by User
License added by: User
License removed by: User
License activation error by: User
iLO RBSU user login: User
Power on request received by: Type
Virtual NMI selected by: User
Virtual Serial Port session started by: User
Virtual Serial Port session stopped by: User
Event Log Explanation
Displays when the system is booted with the
Security Override Switch changed from On to Off.
Displays when the on-board clock is set. Will
display the previous time or "NOT SET" if there
was not a time setting previously.
Displays when the logs are full and the SNMP trap
alert failed for a specified IP address.
Displays when the security has been disabled and
the SNMP trap alert failed for a specified IP
address.
Displays when the security has been enabled and
the SNMP trap alert failed for a specified IP
address.
Displays when an authorized user connects the
Virtual Floppy.
Displays when an authorized user disconnects the
Virtual Floppy.
Displays when an authorized user adds a license.
Displays when an authorized user removes a
license.
Displays when there is an error activating the
license.
Displays when an authorized user logs in to
iLO RBSU.
A power request was received as one of the
following types:
Power Button
Wake On LAN
Automatic Power On
Displays when an authorized user selects the
Virtual NMI button.
Displays when a Virtual Serial Port session is
started.
Displays when a Virtual Serial Port session is
ended.
Troubleshooting iLO 369