User Setting Commands - ZyXEL Communications UAG Series Cli Reference Manual

Chapter 22 User/Group

22.2.3 User Setting Commands

This table lists the commands for user settings, except for forcing user authentication.
Table 85 username/groupname Commands Summary: Settings
COMMAND
show users default-setting {all | user-type
{admin|user|guest|limited-admin|ext-user|
ext-group-user}}
users default-setting [no] logon-lease-time
<0..1440>
users default-setting [no] logon-re-auth-time
<0..1440>
users default-setting [no] user-type {admin
|ext-user|guest|limited-admin|user|ext-group-
user}
users default-setting [no] user-type {admin
|ext-user|guest|limited-admin|user|ext-group-
user} logon-lease-time <0..1440>
users default-setting [no] user-type {admin
|ext-user|guest|limited-admin|user|ext-group-
user} logon-re-auth-time <0..1440>
show users retry-settings
[no] users retry-limit
[no] users retry-count <1..99>
[no] users lockout-period <1..65535>
show users simultaneous-logon-settings
[no] users simultaneous-logon {administration
| access} enforce
[no] users simultaneous-logon {administration
| access} limit <1..1024>
show users update-lease-settings
[no] users update-lease automation
show users idle-detection-settings
[no] users idle-detection
[no] users idle-detection timeout <1..60>
158
DESCRIPTION
Displays the default lease and reauthentication times for the
specified type of user accounts.
Sets the default lease time (in minutes) for each new user. Set it to
zero to set unlimited lease time. The
lease time to five.
Sets the default reauthorization time (in minutes) for each new
user. Set it to zero to set unlimited reauthorization time. The
command sets the default reauthorization time to thirty.
Sets the default user type for each new user. The
the default user type to user.
Sets the default lease time (in minutes) for each type of new user.
Set it to zero for unlimited lease time. The
default lease time to five.
Sets the default reauthorization time (in minutes) for each type of
new user. Set it to zero for unlimited reauthorization time. The
command sets the default reauthorization time to thirty.
Displays the current retry limit settings for users.
Enables the retry limit for users. The
retry limit.
Sets the number of failed login attempts a user can have before the
account or IP address is locked out for lockout-period minutes. The
command sets the retry-count to five.
no
Sets the amount of time, in minutes, a user or IP address is locked
out after retry-count number of failed login attempts. The
command sets the lockout period to thirty minutes.
Displays the current settings for simultaneous logins by users.
Enables the limit on the number of simultaneous logins by users of
the specified account-type. The
allows an unlimited number of simultaneous logins.
Sets the limit for the number of simultaneous logins by users of the
specified account-type. The
Displays whether or not access users can automatically renew their
lease time.
Lets users automatically renew their lease time. The
prevents them from automatically renewing it.
Displays whether or not users are automatically logged out, and, if
so, how many minutes of idle time must pass before they are
logged out.
Enables logging users out after a specified number of minutes of
idle time. The command disables logging them out.
no
Sets the number of minutes of idle time before users are
automatically logged out. The
timeout to three minutes.
command sets the default
no
command sets
no
command sets the
no
command disables the
no
command disables the limit, or
no
command sets the limit to one.
no
no
command sets the idle-detection
no
UAG CLI Reference Guide
no
no
no
command