Console Port; Web Configurator Console - ZyXEL Communications UAG Series Cli Reference Manual

Chapter 1 Command Line Interface

1.2.1 Console Port

The default settings for the console port are as follows.
Table 1 Managing the UAG: Console Port
SETTING
Speed
Data Bits
Parity
Stop Bit
Flow Control
When you turn on your UAG, it performs several internal tests as well as line initialization. You can
view the initialization information using the console port.
• Garbled text displays if your terminal emulation program's speed is set lower than the UAG's.
• No text displays if the speed is set higher than the UAG's.
• If changing your terminal emulation program's speed does not get anything to display, restart the
UAG.
• If restarting the UAG does not get anything to display, contact your local customer support.
Figure 1 Console Port Power-on Display
FLASH: AMD 16M
BootModule Version: V1.22 | Mar
DRAM: Size = 512 Mbytes
Kernel Version: V2.6.25.4 | 2012-03-15 10:26:57
ZLD Version: V2.50(AACG.0)b2 | 2012-03-15 11:00:44
Press any key to enter debug mode within 1 seconds.
.....................
After the initialization, the login screen displays.
Figure 2 Login Screen
Welcome to UAG715
Username:
Enter the user name and password at the prompts.
Note: The default login username is admin and password is 1234. The username and
password are case-sensitive.

1.2.2 Web Configurator Console

Note: Before you can access the CLI through the web configurator, make sure your
computer supports the Java Runtime Environment. You will be prompted to
download and install the Java plug-in if it is not already installed.
22
VALUE
115200 bps
8
None
1
Off
8 2012 17:12:28
UAG CLI Reference Guide