User/Group Setting Screen - ZyXEL Communications ZyWall USG20-VPN User Manual

Figure 310 Configuration > Object > User/Group > Group > Add
The following table describes the labels in this screen.
Table 182 Configuration > Object > User/Group > Group > Add
LABEL
Name
Description
Member List
OK
Cancel

29.2.4 User/Group Setting Screen

The Setting screen controls default settings, login settings, lockout settings, and other user
settings for the USG. You can also use this screen to specify when users must log in to the USG
before it routes traffic for them.
To access this screen, login to the Web Configurator, and click Configuration > Object > User/
Group > Setting.
Chapter 29 Object
DESCRIPTION
Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive. User group names have to be different than user names.
Enter the description of the user group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
The Member list displays the names of the users and user groups that have been added
to the user group. The order of members is not important. Select users and groups from
the Available list that you want to be members of this group and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the USG.
Click Cancel to exit this screen without saving your changes.
USG20(W)-VPN Series User's Guide
462