8.4.1 Static Route Commands Examples
The following command sets a static route with IP address 10.10.10.0 and subnet mask
255.255.255.0 and with the next-hop interface wan1. Then use the show command to display the
setting.
Router(config)# ip route 10.10.10.0 255.255.255.0 wan1
Router(config)#
Router(config)# show ip route-settings
Route
===========================================================================
10.10.10.0
UAG CLI Reference Guide
Netmask
Nexthop
255.255.255.0
ge1
Metric
0
Chapter 8 Route
87