This chapter provides information about the report associated commands and how to restart the
UAG using commands. It also covers the daily report e-mail feature.
36.1 Report Commands Summary
The following sections list the report, session, and packet size statistics commands.
36.1.1 Report Commands
This table lists the commands for reports.
Table 137 report Commands
COMMAND
[no] report
show report status
clear report [interface_name]
show report [interface_name
{ip | service | url}]
UAG CLI Reference Guide
C
DESCRIPTION
Begins data collection. The
no
Displays whether or not the UAG is collecting data and how long it has collected data.
Clears the report for the specified interface or for all interfaces.
Displays the traffic report for the specified interface and controls the format of the
report. Formats are:
- traffic by IP address and direction
ip
- traffic by service and direction
service
- hits by URL
url
HAPTER
Reports and Reboot
command stops data collection.
3 6
237