Ddns Commands Summary - ZyXEL Communications UAG Series Cli Reference Manual

Chapter 11 DDNS

11.2 DDNS Commands Summary

The following table describes the values required for many DDNS commands. Other values are
discussed with the corresponding commands.
Table 47 Input Values for DDNS Commands
LABEL
profile_name
The following table lists the DDNS commands.
Table 48 ip ddns Commands
COMMAND
show ddns [profile_name]
[no] ip ddns profile profile_name
[no] service-type {dyndns | dyndns_static |
dyndns_custom | dynu-basic | dynu-premium |
no-ip | peanut-hull | 3322-dyn | 3322-static}
[no] username username password password
[no] host hostname
[no] ip-select {iface | auto | custom}
[no] ip-select-backup {iface | auto | custom}
[no] custom ip
[no] backup-custom ip
[no] mx {ip | domain_name}
[no] wan-iface interface_name
98
DESCRIPTION
The name of the DDNS profile. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
DESCRIPTION
Displays information about the specified DDNS profile or
about all DDNS profiles.
Creates the specified DDNS profile if necessary and enters
sub-command mode. The
no
Sets the service type in the specified DDNS profile. The
command clears it.
Sets the username and password in the specified DDNS
profile. The command clears these fields.
no
username: You can use up to 31 alphanumeric characters and
the underscore (_).
password: You can use up to 64 alphanumeric characters and
the underscore (_).
Sets the domain name in the specified DDNS profile. The
command clears the domain name.
hostname: You may up to 254 alphanumeric characters,
dashes (-), or periods (.), but the first character must be
alphanumeric.
Sets the IP address update policy in the specified DDNS
profile. The command clears the policy.
no
Sets the alternate IP address update policy in the specified
DDNS profile. The command clears the policy.
no
Sets the static IP address in the specified DDNS profile. The
command clears it.
no
Sets the static IP address for the backup interface in the
specified DDNS profile. The
Enables the mail exchanger and sets the fully-qualified
domain name of the mail server to which mail from this
domain name is forwarded. The
mail exchanger.
domain_name: You may use up to 254 alphanumeric
characters, dashes (-), or periods (.), but the first character
must be alphanumeric.
Sets the WAN interface in the specified DDNS profile. The
command clears it.
command deletes it.
command clears it.
no
command disables the
no
UAG CLI Reference Guide
no
no
no