The User/Group Setting Screen - ZyXEL Communications UAG4100 User Manual

Figure 201 Configuration > User/Group > Group > Add
The following table describes the labels in this screen.
Table 140 Configuration > User/Group > Group > Add
LABEL
Name
Description
Member List
OK
Cancel

31.4 The User/Group Setting Screen

The Setting screen controls default settings, login settings, lockout settings, and other user
settings for the UAG. You can also use this screen to specify when users must log in to the UAG
before it routes traffic for them.
To access this screen, login to the Web Configurator, and click Configuration > Object > User/
Group > Setting.
Chapter 31 User/Group
DESCRIPTION
Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive. User group names have to be different than user names.
Enter the description of the user group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
The Member list displays the names of the users and user groups that have been added to
the user group. The order of members is not important. Select users and groups from the
Available list that you want to be members of this group and move them to the Member
list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key to select
multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving your changes.
UAG4100 User's Guide
299