Content Filtering Statistics - ZyXEL Communications UAG Series Cli Reference Manual

Chapter 21 Content Filtering
Use the
configure terminal
commands. See
commands.
Table 79 content-filter url-cache Commands
COMMAND
[no] content-filter cache-timeout _timeout
show content-filter url-cache [all-category] [begin
url_cache_range end url_cache_range] [_count]
show content-filter url-cache
content-filter url-cache test
url
exit

21.9 Content Filtering Statistics

The following table describes the commands for collecting and displaying content filtering statistics.
You must use the
can use these commands.
Table 80 Commands for Content Filtering Statistics
COMMAND
[no] content-filter statistics collect
content-filter statistics flush
show content-filter statistics summary
show content-filter statistics collect
show content-filter statistics summary
150
command to enter the configuration mode to be able to use these
Table 76 on page 144 for details about the values you can input with these
configure terminal
DESCRIPTION
Turn the collection of content filtering statistics on or off.
Clears the collected statistics.
Displays the collected statistics.
Displays whether the collection of content filtering statistics is turned on or
off.
Displays the current content filtering statistics.
DESCRIPTION
Sets how long to keep a content filtering URL cache entry
before discarding it. The
Displays the contents of the content filtering URL cache. You
can specify a range and number of entries to display.
Displays the contents of the content filtering URL cache.
Enters the sub-command mode for testing whether or not a
web site is saved in the UAG's database of restricted web
pages.
Tests whether or not a web site is saved in the UAG's
database of restricted web pages.
Leaves the sub-command mode.
command to enter the configuration mode before you
command clears the setting.
no
UAG CLI Reference Guide