This chapter covers how to use the diagnostics feature.
38.1 Diagnostics
The diagnostics feature provides an easy way for you to generate a file containing the UAG's
configuration and diagnostic information. You may need to generate this file and send it to
customer support during troubleshooting.
38.2 Diagnosis Commands
The following table lists the commands that you can use to have the UAG collect diagnostics
information. Use the
to use these commands.
Table 142 diagnosis Commands
COMMAND
DESCRIPTION
Has the UAG create a new diagnostic file.
diag-info collect
Displays the name, size, and creation date (in yyyy-mm-dd hh:mm:ss format) of the diagnostic file.
show diag-info
38.3 Diagnosis Commands Example
The following example creates a diagnostic file and displays its name, size, and creation date.
Router# configure terminal
Router(config)# diag-info collect
Please wait, collecting information
Router(config)# show diag-info
Filename
: diaginfo-20070423.tar.bz2
File size : 1259 KB
Date
: 2007-04-23 09:55:09
UAG CLI Reference Guide
C
command to enter the configuration mode to be able
configure terminal
HAPTER
Diagnostics
3 8
245