Console Port Logging Commands - ZyXEL Communications UAG Series Cli Reference Manual

35.1.4.1 E-mail Profile Command Examples
The following commands set up e-mail log 1.
Router# configure terminal
Router(config)# logging mail 1 address mail.zyxel.com.tw
Router(config)# logging mail 1 subject AAA
Router(config)# logging mail 1 authentication username lachang.li password XXXXXX
Router(config)# logging mail 1 send-log-to lachang.li@zyxel.com.tw
Router(config)# logging mail 1 send-alerts-to lachang.li@zyxel.com.tw
Router(config)# logging mail 1 from lachang.li@zyxel.com.tw
Router(config)# logging mail 1 schedule weekly day mon hour 3 minute 3
Router(config)# logging mail 1

35.1.5 Console Port Logging Commands

This table lists the commands for the console port settings.
Table 136 logging Commands: Console Port Settings
COMMAND
show logging status console
[no] logging console
logging console category module_name level {alert |
crit | debug | emerg | error | info | notice | warn}
[no] logging console category module_name
UAG CLI Reference Guide
DESCRIPTION
Displays the current settings for the console log. (This log
is not discussed above.)
Enables the console log. The
console log.
Controls whether or not debugging information for the
specified priority is displayed in the console log, if logging
for this category is enabled.
Enables logging for the specified category in the console
log. The command disables logging.
no
Chapter 35 Logs
command disables the
no
235