Content Filter Url Cache Commands - ZyXEL Communications UAG Series Cli Reference Manual

Table 78 content-filter Filtering Profile Commands Summary (continued)
COMMAND
[no] content-filter profile filtering_profile url
url-server
[no] content-filter service-timeout service_timeout
[no] content-filter profile filtering_profile
commtouch-url category {category_name}
content-filter profile filtering_profile commtouch-
url match-unsafe {block | log | pass}
content-filter profile filtering_profile commtouch-
url match {block | log | warn | pass}
content-filter profile filtering_profile commtouch-
url offline {block | log | warn | pass}
content-filter profile filtering_profile commtouch-
url unrate {block | log | warn | pass}
no content-filter profile filtering_profile
commtouch-url match-unsafe {log}
no content-filter profile filtering_profile
commtouch-url match {log}
no content-filter profile filtering_profile
commtouch-url offline {log}
no content-filter profile filtering_profile
commtouch-url unrate {log}
show content-filter profile [filtering_profile]

21.8 Content Filter URL Cache Commands

The following table lists the commands that you can use to view and configure your UAG's URL
caching. You can configure how long a categorized web site address remains in the as well as view
those web site addresses to which access has been allowed or blocked based on the responses from
the external content filtering server. The UAG only queries the external content filtering database
for sites not found in the cache.
UAG CLI Reference Guide
DESCRIPTION
Sets a content filtering profile to use the external web
filtering service. The command has the profile not use
no
the external web filtering service.
Sets how many seconds the UAG is to wait for a response
from the external content filtering server. The
clears the setting.
Sets a CommTouch content filtering profile to check for
specific web site categories. The
profile not check for the specified categories.
Sets the action for attempted access to web pages that
match the CommTouch profile's selected unsafe categories.
Block access, log access, or allow access.
Sets the action for attempted access to web pages that
match the CommTouch profile's selected managed
categories.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
Sets the action for attempted access to web pages if the
CommTouch external content filtering database is
unavailable.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
Sets the action for attempted access to web pages that the
CommTouch external web filtering service has not
categorized.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
Has the UAG not log attempted access to web pages that
match the CommTouch profile's selected unsafe categories.
Has the UAG not log attempted access to web pages that
match the CommTouch profile's selected managed
categories.
Has the UAG not log access to web pages if the
CommTouch external content filtering database is
unavailable.
Has the UAG not log access to web pages that the
CommTouch external web filtering service has not
categorized.
Displays the specified content filtering profile's settings or
the settings of all them if you don't specify one.
Chapter 21 Content Filtering
command
no
command has the
no
149