System Log Commands - ZyXEL Communications UAG Series Cli Reference Manual

Chapter 35 Logs

35.1.2 System Log Commands

This table lists the commands for the system log settings.
Table 132 logging Commands: System Log Settings
COMMAND
show logging status system-log
logging system-log category module_name
{disable | level normal | level all}
[no] logging system-log suppression
interval <10..600>
[no] logging system-log suppression
[no] connectivity-check continuous-log
activate
show connectivity-check continuous-log
status
clear logging system-log buffer
35.1.2.1 System Log Command Examples
The following command displays the current status of the system log.
Router# configure terminal
Router(config)# show logging status system-log
58 events logged
suppression active
suppression interval: 10
category settings
content-filter
forward-web-sites : no
warning-web-sites : normal , user
myZyXEL.com
bwm
ipsec
sessions-limit
built-in-service
system-monitoring : no
routing-protocol
pki
interface-statistics: no
port-grouping
traffic-log
adp
daily-report
dhcp
web-authentication: normal , smtp-redirect
vpn-1-1-mapping
Router(config)#
232
DESCRIPTION
Displays the current settings for the system log.
Specifies what kind of information, if any, is logged in the system log and
debugging log for the specified category.
Sets the log consolidation interval for the system log. The no command
sets the interval to ten.
Enables log consolidation in the system log. The no command disables log
consolidation in the system log.
Has the UAG generate a log for each connectivity check. The no command
has the UAG only log the first connectivity check.
Displays whether or not the UAG generates a log for each connectivity
check.
Clears the system log.
: yes
:
: normal , content-filter-forward: no
, blocked-web-sites : normal ,
: normal , zysh
: normal , ike
: normal , firewall
: normal , policy-route
: normal , system
, connectivity-check: normal ,
: normal , nat
: normal , interface
, account
: normal , ssl-vpn
: no , file-manage
: normal , usb-storage
: normal , ipmac-binding
: normal , eps
: normal , default
,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: all ,
UAG CLI Reference Guide