ZyXEL Communications UAG Series Cli Reference Manual page 123

Table 63 Command Summary: Firewall (continued)
COMMAND
firewall profile_name {zone_object|Device} delete
<1..5000>
firewall profile_name {zone_object|Device} flush
firewall profile_name {zone_object|Device} insert
rule_number
firewall profile_name {zone_object|Device} move
rule_number to rule_number
[no] firewall activate
firewall append
firewall default-rule action {allow | deny | reject} { no
log | log [alert] }
firewall delete rule_number
firewall flush
firewall insert rule_number
firewall move rule_number to rule_number
show connlimit max-per-host
show firewall
show firewall rule_number
show firewall profile_name {zone_object|Device}
show firewall profile_name {zone_object|Device}
rule_number
show firewall status
show firewall block_rules
show firewall any Device
UAG CLI Reference Guide
DESCRIPTION
Removes a direction specific through-Device rule or
to-Device rule.
<1..5000>: the index number in a direction specific
firewall rule list.
Removes all direction specific through-Device rule or
to-Device rules.
Enters the firewall sub-command mode to add a
direction specific through-Device rule or to-Device
rule before the specified rule number. See
page 124 for the sub-commands.
Moves a direction specific through-Device rule or to-
Device rule to the number that you specified.
Enables the firewall on the UAG. The
disables the firewall.
Enters the firewall sub-command mode to add a
global firewall rule to the end of the global rule list.
See Table 64 on page 124 for the sub-commands.
Sets how the firewall handles packets that do not
match any other firewall rule.
Removes a firewall rule.
Removes all firewall rules.
Enters the firewall sub-command mode to add a
firewall rule before the specified rule number. See
Table 64 on page 124 for the sub-commands.
Moves a firewall rule to the number that you specified.
Displays the highest number of sessions that the UAG
will permit a host to have at one time.
Displays all firewall settings.
Displays a firewall rule's settings.
Displays all firewall rules settings for the specified
packet direction.
Displays a specified firewall rule's settings for the
specified packet direction.
Displays whether or not the firewall is active, whether
or not asymmetrical route topology is allowed, and
the default firewall rule's configuration.
Displays all the firewall rules that deny access.
Shows all the to-Device firewall rules.
Chapter 18 Firewall
Table 64 on
command
no
123