Reboot - ZyXEL Communications UAG Series Cli Reference Manual

This displays the email daily report settings and has the UAG send the report.
Router(config)# show daily-report status
email daily report status
=========================
activate: yes
scheduled time: 13:57
reset counter: no
smtp address: example-SMTP-mail-server.com
smtp port: 25
smtp auth: yes
smtp username: 12345
smtp password: pass12345
mail subject:
append system name: no
append date time: yes
mail from: my-email@example.com
mail-to-1: example-administrator@example.com
mail-to-2:
mail-to-3:
mail-to-4: my-email@example.com
mail-to-5:
cpu-usage: yes
mem-usage: yes
session-usage: yes
port-usage: yes
traffic-report: yes
Router(config)# daily-report send-now

36.3 Reboot

Use this to restart the device (for example, if the device begins behaving erratically).
If you made changes in the CLI, you have to use the
before you reboot. Otherwise, the changes are lost when you reboot.
Use the
reboot
UAG CLI Reference Guide
test subject
command to restart the device.
Chapter 36 Reports and Reboot
command to save the configuration
write
241