Learned Routing Information Commands; Show Ip Route Command Example - ZyXEL Communications UAG Series Cli Reference Manual

Chapter 9 Routing Protocol

9.2.5 Learned Routing Information Commands

This table lists the commands to look at learned routing information.
Table 43 ip route Commands: Learned Routing Information
COMMAND
show ip route [kernel | connected | static | ospf | rip |
bgp]

9.2.6 show ip route Command Example

The following example shows learned routing information on the UAG.
Router> show ip route
Flags: A - Activated route, S - Static route, C - directly Connected
O - OSPF derived, R - RIP derived, G - selected Gateway
! - reject, B - Black hole, L - Loop
IP Address/Netmask
===========================================================================
0.0.0.0/0
127.0.0.0/8
172.16.1.0/24
192.168.1.0/24
192.168.2.0/24
192.168.3.0/24
92
Gateway IFace
172.16.1.254 wan1
0.0.0.0 lo
0.0.0.0 wan1
0.0.0.0 lan1
0.0.0.0 lan2
0.0.0.0 dmz
DESCRIPTION
Displays learned routing and other routing
information.
Metric Flags
0 ASG
0 ACG
0 ACG
0 ACG
0 ACG
0 ACG
Persist
-
-
-
-
-
-
UAG CLI Reference Guide