Logs; Chapter 35 Logs; Log Commands Summary; Log Entries Commands - ZyXEL Communications UAG Series Cli Reference Manual

This chapter provides information about the UAG's logs.
Note: When the system log reaches the maximum number of log messages, new log
messages automatically overwrite existing log messages, starting with the oldest
existing log message first.
See the User's Guide for the maximum number of system log messages in the UAG.

35.1 Log Commands Summary

The following table describes the values required for many log commands. Other values are
discussed with the corresponding commands.
Table 130 Input Values for Log Commands
LABEL
interface_name The name of the interface. This depends on the UAG model.
module_name
protocol
The following sections list the logging commands.

35.1.1 Log Entries Commands

This table lists the commands to look at log entries.
Table 131 logging Commands: Log Entries
COMMAND
show logging entries [priority pri] [category
module_name] [srcip ip] [dstip ip] [service
service_name] [begin <1..512> end <1..512>]
[keyword keyword] [srciface interface_name]
[dstiface interface_name] [protocol protocol]
show logging entries field field [begin
<1..512> end <1..512>]
UAG CLI Reference Guide
C
DESCRIPTION
See Table 13 on page 55 for detailed information about the interface name.
The name of the category; kernel, syslog, .... The default category includes debugging
messages generated by open source software. The
all categories.
The name of a protocol such as TCP, UDP, ICMP.
DESCRIPTION
Displays the specified entries in the system log.
pri: alert | crit | debug | emerg | error | info | notice | warn
keyword: You can use alphanumeric and
characters, and it can be up to 63 characters long. This searches
the message, source, destination, and notes fields.
Displays the specified fields in the system log.
field: time | msg | src | dst | note | pri | cat | all
HAPTER
category includes all messages in
all
3 5

Logs

()+/:=?!*#@$_%-
231