ZyXEL Communications UAG Series Cli Reference Manual page 146

Chapter 21 Content Filtering
mode to be able to use these commands. See
can input with these commands.
Table 77 content-filter General Commands
COMMAND
[no] content-filter active
[no] content-filter block message message
[no] content-filter block redirect redirect_url
[no] content-filter cache-timeout _timeout
[no] content-filter default block
[no] content-filter license license
content-filter passed warning flush
content-filter passed warning timeout <1..1440>
[no] content-filter policy policy_number address
schedule filtering_profile
content-filter policy policy_number shutdown
content-filter url-server test bluecoat
url [ server rating_server ] [ timeout
query_timeout ]
exit
content-filter url-server test commtouch
url timeout query_timeout
exit
content-filter zsb port <1..65535>
content-filter common-list {trust|forbid}
146
Table 76 on page 144
DESCRIPTION
Turns on content filtering. The
Sets the message to display when content filtering blocks
access to a web page. The
Sets the URL of the web page to which to send users when their
web access is blocked by content filtering. The
clears the setting.
Sets how long the UAG is to keep an entry in the content
filtering URL before discarding it. The
setting.
Has the UAG block sessions that do not match a content
filtering policy. The command allows sessions that do not
no
match a content filtering policy.
Sets the license key for the external web filtering service. The
command clears the setting.
no
Clears the UAG's record of sessions for which it has given the
user a warning before allowing access.
Sets how long to keep records of sessions for which the UAG
has given the user a warning before allowing access.
Sets a content filtering policy. The
Disables a content filtering policy.
Enters the sub-command mode for testing whether or not a web
site is saved in the BlueCoat external content filter server's
database of restricted web pages.
Tests whether or not a web site is saved in the external content
filter server's database of restricted web pages.
Leaves the sub-command mode.
Enters the sub-command mode for testing the Commtouch
external content filter server's reachability.
Specify the Commtouch server's URL and how long to wait for a
response.
Leaves the sub-command mode.
Sets the port the UAG uses to check if requested web pages
pose a threat to users or their computers.
Enters the sub-command for configuring a common list of
trusted or forbidden web sites.
The content filtering profile commands let you configure trusted
or forbidden URLs for individual profiles. URL checking is applied
in the following order: profile trusted web sites, common
trusted web sites, profile forbidden web sites, common
forbidden web sites, and then profile keywords.
for details about the values you
command turns it off.
no
command clears the setting.
no
command
no
command clears the
no
command removes it.
no
UAG CLI Reference Guide