ZyXEL Communications UAG Series Cli Reference Manual page 106

Chapter 13 VPN 1-1 Mapping
The following table describes the commands available for VPN 1-1 mapping. You must use the
configure terminal
configuration commands.
Table 52 Command Summary: vpn-1-1-map
COMMAND
[no] vpn-1-1-map activate
[no] vpn-1-1-map pool profile_name
[no] vpn-1-1-map rule <1..16>
vpn-1-1-map pool rename profile_name
profile_name
vpn-1-1-map rule append
vpn-1-1-map rule flush
vpn-1-1-map rule insert <1..16>
vpn-1-1-map rule move <1..16> to <1..16>
show vpn-1-1-map activation
show vpn-1-1-map pool [profile_name]
show vpn-1-1-map rule [<1..16>]
show vpn-1-1-map rule begin <1..16> end
<1..16>
show vpn-1-1-map statistics summary
show vpn-1-1-map user-mapping summary
106
command to enter the configuration mode before you can use the
DESCRIPTION
Enables VPN 1-1 mapping on the UAG. The no command disables VPN
1-1 mapping on the UAG.
Enters the vpn-1-1-map pool sub-command mode to create the
specified VPN 1-1 mapping pool profile. See
the sub-commands. The no command removes the pool profile.
A pool profile defines the public IP address(es) that the UAG assigns to
the matched users and the interface through which the user's traffic is
forwarded.
Enters the vpn-1-1-map rule sub-command mode to create the
specified VPN 1-1 mapping rule. See
commands. The no command removes the rule.
Renames the specified VPN 1-1 mapping pool profile (first
profile_name) to the specified name (second profile_name).
Enters the vpn-1-1-map rule sub-command mode to create a new VPN
1-1 mapping rule at the end of the current list. See
107 for the sub-commands.
Clears all VPN 1-1 mapping rules.
Enters the vpn-1-1-map rule sub-command mode to add a new VPN 1-
1 mapping rule before the specified rule number. See
107 for the sub-commands.
Moves the specified rule to the specified location and renumbers the
other rules accordingly.
Shows whether the VPN 1-1 mapping feature is enabled or disabled on
the UAG.
Displays settings of the specified or all pool profiles.
Displays settings of the specified or all VPN 1-1 mapping rules.
Displays settings for a range of VPN 1-1 mapping rules.
Displays statistics for each of the VPN 1-1 mapping rules
Displays the status of the active users to which the UAG applied a VPN
1-1 mapping rule
Table 53 on page 107
Table 54 on page 107 for the sub-
Table 54 on page
Table 54 on page
UAG CLI Reference Guide
for