Stapling Positions - Xerox DocuPrint N3225 System Administrator Manual

Using the Finisher

Stapling Positions

1-128 System Administrator Guide
Stapling positions are set in the System Menu at the User
Interface (See Chapter 1 of the System Administrator Guide)
or by PJL commands. (See Table 2.4 on page B-7 and
Table 2.5 on page B-8.)
Letter, Statement, B5-JIS and Executive Paper
Figure 1.3 illustrates the approximate position of staples
for Letter, Statement, B5-JIS and Executive paper in
Portrait, Landscape, and Inverse Landscape Modes based
upon the stapling position indicated in the left hand
column.
Figure 1.3 Stapling positions for Letter, Statement,
B5-JIS and Executive paper
Stapling
Portrait
Position
Position 1
/
A
Position 2
A
—
Dual
|
A
|
Inverse
Landscape
Landscape
\
A
\
|
A
— —
A
—
A
A
|
A
—