Xerox DocuPrint N3225 System Administrator Manual page 201

Table 5.2 Control Panel messages and corrective actions (continued)
Message
†
3000 -Serial
† Appears in the upper left
corner of the display.
†
3000 -Enet
† Appears in the upper left
corner of the display.
†
4000 -NIC
† Appears in the upper left
corner of the display.
†
5000 -MEMORY
† Appears in the upper left
corner of the display.
All Jobs
Delete
All Jobs
Print
Canceling Job...
Job name
Description/Corrective Action
A fault condition has occurred in the Serial interface. Power OFF the printer
and reseat the interface card. Power ON the printer. If this code appears
again at Power ON, contact your Customer Support Center.
A fault condition has occurred in the Ethernet interface. Power OFF the
printer and reseat the interface card. Power ON the printer. If this code
appears again at Power ON, contact your Customer Support Center.
A fault condition has occurred. Power OFF the printer and reseat the
interface card. Power ON the printer. If this code appears again at Power ON,
contact your Customer Support Center.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
This message appears for secure printing. You can delete all secure jobs in
your queue. Press Value Up
Delete and Print. Select Delete
This message appears for secure printing. You can print all secure jobs in your
queue. Press Value Up
Delete all jobs. Select Print
A job is being cancelled.
or Value Down
to delete all jobs and press Enter
or Value Down to toggle between
to print all jobs and press Enter
Chapter 5: Troubleshooting
Control Panel Messages
to toggle between
.
Print and
.
Table 5.2 Page 5 of 24
5-9