Xerox DocuPrint N3225 System Administrator Manual page 215

Table 5.2 Control Panel messages and corrective actions (continued)
Message
Power Saver On
Press Menu
Print Using
<size> <type>
Processing...
<job name>
Processing...
Config Sheet
Processing...
DEMO
Processing...
Disk Directory
Processing...
Envelope Feeder
Processing...
Fault History
Description/Corrective Action
The printer has set itself to lower power mode (Power Saver is on). As soon as
it receives the next print job, the printer leaves power saver mode.
This message appears when there are no secure jobs in the job queue. Press
Menu Up or Menu Down
This messages appears when the available paper size or type does not match
what was requested and Value Up or Value Down was pressed. Use Value
Up or Value Down
then press Enter . If the paper size and type that was substituted is not
acceptable, load the requested paper size and type and print the job again.
This message appears when a job is being processed. The job's name appears
on the second line.
A Configuration Sheet is being printed.
A Demo Page is being printed.
The Hard Drive directory is being created.
The Envelope Feeder is being used.
The printer is generating and printing a fault history log.
Control Panel Messages
to return to the Main Menu.
to find an acceptable available size and type,
Table 5.2 Page 19 of 24
Chapter 5: Troubleshooting 5-23