Xerox DocuPrint N3225 System Administrator Manual page 100

Using the Menu System
Table 1.26 Novell Menu functions (continued)
Menu Item and Function
PServer Name
Set the name of the PServer in this
printer (a name of 2 to 47 characters
in length). The available values are:
A - Z, 0 - 9, hyphen (-),underscore (_)
XRX_<macaddress>*
For this item (after Step 3), Item
Up moves the cursor to the right
through the displayed PServer name
and Item Down moves the cursor
to the left. This allows you to change
characters within the string rather
than having to re-enter the entire
string.
With the cursor displayed under a
character, Value Up
the value of that character and Value
Down decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with Value
Up or Value Down
then pressing Enter
1-92 System Administrator Guide
1. Press Menu Up
Down
2. Press Item Up
Down
3. Press Value Up
Down
4. Press Value Up
Down
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down Value
Up
increments causes continuous scrolling
through the values.
5. To change other characters in
the PServer name, press Item
Up
scroll right or left respectively
through the character string,
and
then press Value Up
.
Value Down
value of the character above
the cursor (as in Step 4).
6. When you have completed
setting the PServer Name,
press Enter
7. Press On Line
Keystrokes
or Menu
until you see:
or Item
until you see:
or Value
. You will see:
or Value
to change the value
or Value Down
or Item Down to
or
to change the
. You will see:
. You will see:
Display
Menus
Novell Menu
Novell Menu
PServer Name
PSer ver Na me
xxx...xxx
PSer ver Na me
xxx...xxx
PSer ver Na me
xxx...xxx
Novell Menu
PServer Name
Ready
Table 1.26 Page 4 of 7
=
=
=