Xerox DocuPrint N3225 System Administrator Manual page 93

Table 1.24 Token Ring Menu functions (continued)
Menu Item and Function
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (60*)
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., form feed, reset,
etc.).
The time changes incrementally by 1
second each time either Value Up
or Value Down is pressed.
Holding down Value Up
Down causes continuous scrolling
through the values.
Keystrokes
1. Press Menu Up
Down until you see:
2. Press Item Up
Down until you see:
3. Press Value Up
Down until you see:
4. Press Enter
5. Press On Line
or Value
Using the Menu System
or Menu
Menus
Token Ring Menu
or Item
Token Ring Menu
Port Timeout
or Value
Port Ti meo ut
New Value
. You will see:
Token Ring Menu
Port Timeout
. You will see:
Ready
Table 1.24 Page 12 of 14
Chapter 1: Configuring the Printer
Display
=
1-85