Xerox DocuPrint N3225 System Administrator Manual page 292

Network laser printers
Hide thumbs Also See for DocuPrint N3225:
Table of Contents

Advertisement

Interface Cards
6-50
System Administrator Guide
Remove the interface card by gently lifting it away from
5
the pin receptacle and pulling it away from the controller
board.
6
Re-install the cover plate on the controller board using
the two screws.
Replace the controller board and tighten the thumbscrews
7
by hand.
8
Re-attach the GFI power cord to the printer. Re-attach any
cables to printer ports.
9
Power ON the printer.
10
Print a Configuration Sheet (page 3-91) and confirm that
the proper network interface is now indicated on the
Configuration Sheet.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint n4025

Table of Contents