Control Panel Messages
Table 5.2
Control Panel messages and corrective actions (continued)
Message
Paper Jam
Clear Area E
Paper Jam
Clear Area F
Paper Jam
Clear Area G
Paper Jam
Clear Area H
Paper Jam
Clear Area G,H
Paper Jam
Clear Duplx Unit
Paper Jam
Clear Env Feeder
Paper Jam
Clear Tray 5
Please Wait
5-22
System Administrator Guide
Description/Corrective Action
A paper jam has occurred in Area E. Open Door E and remove jammed
paper. See"Clearing Area E" (page 5-39).
A paper jam has occurred in Area F. Open Door F and remove jammed paper.
See "Clearing Area F" (page 5-39).
A paper jam has occurred in Area G. Open Door G and remove jammed
paper. See "Clearing Area G" (page 5-40).
A paper jam has occurred in Area H. Open Door H and remove jammed
paper. See "Clearing Area H" (page 5-40).
A paper jam has occurred in Areas G and H. Open Doors G and H and
remove jammed paper. See "Clearing Area G" (page 5-40) and "Cle ar ing
A re a H" (page 5-40).
A paper jam has occurred in the Duplex Module. Open the Duplex Module
and remove jammed paper. See "Clearing Paper Jams" (page 5-32) and
"Clearing the Duplex Module" (page 5-42).
The printer cannot feed from the Envelope Feeder. Open the Envelope
Feeder and remove any jammed envelopes.
A paper jam has occurred in Tray 5 of the 2,500 Sheet Feeder. Open Tray 5
and remove jammed paper. See "Clearing Paper Jams" (page 5-32) and
"Clearing Tray 5" (page 5-41).
An operation that takes time is proceeding. Please wait until the operation
finishes and the display changes.
Table 5.2 Page 18 of 24