Xerox DocuPrint N3225 System Administrator Manual page 209

Table 5.2 Control Panel messages and corrective actions (continued)
Message
IOT NVM Fail
Power Off/On
Job n
Job n
Delete
Job n
Print
Laser Failure
Power Off/On
Description/Corrective Action
Nonvolatile Memory (NVM) has failed on the print engine (also called the
IOT—Image Output Terminal). Printing cannot resume. Power OFF and ON
the printer. If this message reappears, contact your Customer Support
Center.
This message appears after selecting a secure job to be printed or deleted. If
the job was given a name, that name appears in place of "Job n". Print or
delete the job (see the following two messages).
This message appears from the Password Menu. It causes a specific job to be
deleted. If the job was given a name, that name appears in place of "Job n".
Press Value Up or Value Down
Select Delete to delete the job and press Enter
This message appears from the Password Menu. It causes a specific job to be
printed. If the job was given a name, that name appears in place of "Job n".
Press Value Up or Value Down
Select Print to print the job and press Enter
The laser assembly has failed and printing cannot continue. Power OFF and
ON the printer. If this message reappears, contact your Customer Support
Center.
Control Panel Messages
to toggle between Delete
.
to toggle between Print
.
Table 5.2 Page 13 of 24
Chapter 5: Troubleshooting
and Print.
and Delete.
5-17