Xerox DocuPrint N3225 System Administrator Manual page 261

Attach the two lower stands to the printer and hand
4
tighten the supplied screws.
5 Insert the upper stand into the lower stands and snap into
place.
Be sure the upper stand is facing in the correct
direction.
If the Face-up Bin is installed, remove it. Then, with two
6
people, lower the Mailbox/Collator onto the printer.
Be sure to grasp the handle and support brace as
shown above, and keep the connecting cord above
the printer.
7 Align with the connecting pin as shown.
Be sure that you have another person helping you
perform this step.
Chapter 6: Installing and Removing Printer Options
10-bin Mailbox/Collator
6-19