Xerox DocuPrint N3225 System Administrator Manual page 43

Table 1.13 System Menu Items (continued)
Menu
System Menu Edge-to-Edge
(continued)
XIE
Resolution
Output Timeout
Output Offset
Output Dest
Staple Mode
Print PS Errors
Power Saver
Config Legal/B4
Config Exec/B5
Defaults
Description
Enables or disables edge-to-edge printing in PCL.
Sets the default Xerox Image Enhancement (XIE) mode.
Sets the default resolution for PCL and PostScript jobs.
Determines how many seconds the system will wait after a
bin is filled before directing output to an alternate bin.
Enables or disables alternately offsetting output from jobs.
Sets the default paper output destination for PCL and
PostScript jobs.
Selects the default staple position (when the Finisher is
installed.)
Controls the use of the built-in PostScript error handler or
debugger.
Defines a period of inactivity after which time the printer will
enter a low power state.
Selects which of these sizes will be recognized by the tray
size switches.
Selects which of these sizes will be recognized by the tray
size switches.
Sets the type of factory defaults to use when a "Factory
Default" is performed.
Refer to Table 1.14 on page 1-36 for step-by-step
instructions.
Chapter 1: Configuring the Printer
Using the Menu System
Table 1.13 Page 2 of 2
1-35