Xerox DocuPrint N3225 System Administrator Manual page 204

Control Panel Messages
Table 5.2 Control Panel messages and corrective actions (continued)
Message
Clear Area H
Close Cover H
Close Door A
Close Door B
Close Door C
Close Door D
Close Door E
Close Door F
Close Door G
Close Duplx Unit
Close Staple
Door
CRUM Failure
Power Off/On
5-12 System Administrator Guide
Description/Corrective Action
The Finisher compiler tray (Area H) safety switch is on. Remove the obstacle
from Area H.
Finisher cover H is not closed entirely, or the Compiler cover safety switch is
open or the cover switch is open. Remove the obstacle from this area and
close the door.
Door A is open. Close Door A.
Door B is open. Close Door B.
Door C is open. Close Door C.
Door D is open. Close Door D.
Door E is open. Close Door E, the Gate Cover of the Finisher.
Door F is open. Close Door F, the Transport Cover of the Finisher.
Door G is open. Close Door G, the Top Cover of the Finisher.
The Duplex Module is open. Close the Duplex Module.
The Finisher's staple door is open. Close the stapler door.
A Laser Print Cartridge memory failure has occurred. Power OFF and ON the
printer. If the problem returns, printing cannot resume. Power OFF the
printer and contact your Customer Support Center.
Table 5.2 Page 8 of 24