Xerox DocuPrint N3225 System Administrator Manual page 205

Table 5.2 Control Panel messages and corrective actions (continued)
Message
Delete Jobs
Deleting...
Job name
Demo Mode
Disk Error
Format Disk
Disk Full
Downloading
Please Wait
Download Failed
Please Reboot
Download Passed
Please Reboot
Duplex Unit Fail
Power Off/On
Description/Corrective Action
This Reset Menu selection allows you to delete secure or proof jobs from the
hard disk. Press Item Up
No. Select Yes to delete the jobs and press Enter
The secure or proof job(s) you asked to delete is(are) being deleted.
This Reset Menu selection allows you to enter the printer demonstration
mode. Press Value Up
No. Select Yes and press Enter
A general failure (such as read/write) of the hard disk has occurred. Power
OFF and Power ON the printer. If this message appears again at Power ON,
contact your Customer Support Center.
A secure or proof job spooled to the disk exceeds the available free space on
the hard disk. The job will be cancelled and deleted after part of the first copy
is printed. The job is cancelled and deleted after printing the first copy of the
partial job. Delete fonts, macros, or secure and proof jobs to make space.
The printer is being loaded with new operating code. Please wait.
A problem occurred during downloading printer operating code. Printing
may continue, but use of the disk is locked out. Try loading again.
The downloading process has passed and the printer must be rebooted for
changes to take effect.
The Duplex Module has failed. Printing from the Duplex Module cannot
continue. Power OFF the Printer. Remove and re-install the Duplex Module.
See page 6-14. Then Power ON the printer. If it still fails, contact your
Customer Support Center.
or Item Down to toggle between
.
or Value Down to toggle between
to enter the demonstration mode.
Chapter 5: Troubleshooting
Control Panel Messages
Yes and
Yes and
Table 5.2 Page 9 of 24
5-13