Xerox DocuPrint N3225 System Administrator Manual page 102

Using the Menu System
Table 1.26 Novell Menu functions (continued)
Menu Item and Function
NDS Tree
Set the NDS Tree character string
(from 0 to 63 characters in length).
The available values are:
Null
A - Z, 0 - 9, hyphen (-) and underscore (_)
For this item (after Step 3), Item
Up moves the cursor to the right
through the displayed NDS Tree
character string and Item Down
moves the cursor to the left. This
allows you to change characters
within the string rather than having to
re-enter the entire string.
With the cursor displayed under a
character, Value Up
the value of that character and Value
Down decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with Value
Up or Value Down
then pressing Enter
1-94 System Administrator Guide
1. Press Menu Up
Down
2. Press Item Up
Down
3. Press Value Up
Down
4. Press Value Up
Down
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down Value
Up
increments causes continuous scrolling
through the values.
5. To change other characters in
the NDS Tree character string,
press Item Up
Down
respectively through the
and
character string, then press
.
Value Up
Down
of the character above the
cursor (as in Step 4).
6. When you have completed
setting the NDS Tree, press
Enter
7. Press On Line
Keystrokes
or Menu
until you see:
or Item
until you see:
or Value
. You will see:
or Value
to change the value
or Value Down
or Item
to scroll right or left
or Value
to change the value
. You will see:
. You will see:
Display
Menus
Novell Menu
Novell Menu
NDS Tree
NDS Tre e
xxx...xxx
NDS Tre e
xxx...xxx
NDS Tre e
xxx...xxx
Novell Menu
NDS Tree
Ready
Table 1.26 Page 6 of 7
=
=
=