Xerox DocuPrint N3225 System Administrator Manual page 161

<ESC>%-12345X @PJL<CR><LF>
@PJL FSDOWNLOAD FORMAT:BINARY NAME ="0:\pcl\fonts\font1" SIZE=XX<CR><LF>
<binary data><ESC>%-12345X
<ESC>&n6W<HEX'00'>font2<CR,LF>
<ESC>&n6W<HEX'01'>font1<CR,LF>
<ESC>&n6W<HEX'02'>font1<CR,LF>
The following is a sequence of commands that can be sent
to the printer to download a font to the disk.
In this example:
• <ESC>%-12345X is the PJL UEL command which starts
this sequence.
• @PJL<CR><LF> is the mandatory PJL command
following the UEL command.
• @PJL FSDOWNLOAD... downloads a font named
"font1" that is "XX" bytes in size.
• <ESC>%-12345X is the UEL command which ends this
sequence.
• Invoking this font requires the following PCL
sequence:
Sets the current font ID to the given string ID
"font2"
Associates the current font ID with the string ID
"font1"
Selects the font referred to as "font1" for the
primary font
Notes:
• The case of the string ID must be the same as the case
of the font name in the FSDOWNLOAD command.
The byte count ("6" in the above example) must equal the
string ID byte count plus 1.
Chapter 3: Using the Hard Disk Drive and Flash Memory
Downloading Fonts, Forms and Macros
3-7