Xerox DocuPrint N3225 System Administrator Manual page 40

Using the Menu System
Table 1.12 PCL Menu functions (continued)
Menu Item and Function
Orientation
Set the default orientation used in
PCL.
The available values are:
Portrait*
Landscape
Form Length
Set the number of lines per page used
in PCL. The available values are:
005 - 128 (60* USA) (64* Europe)
Form Length is automatically adjusted
when Paper Size is changed. For
example, setting Paper Size to
adjusts Form Length to 64
automatically. Setting Paper Size to
adjusts Form Length to
Letter
60 . Whenever Paper Size is changed,
Form Length is recalculated using the
formula: Form Length = ((logical page
length in inches - 1 inch) * 6).
The Form Length value changes
incrementally by 1 each time either
Value Up or Value Down
pressed. Holding down Value Up
or Value Down causes continuous
scrolling through the Form Length
values.
The value of this setting after
performing a Reset Menus depends
on the value of the Defaults setting.
1-32 System Administrator Guide
Keystrokes
1. Press Menu Up
Down until you see:
2. Press Item Up
Down until you see:
3. Press Value Up
Down until you see:
4. Press Enter
5. Press On Line
1. Press Menu Up
Down until you see:
2. Press Item Up
until you see:
Down
3. Press Value Up
Down until you see:
A4
4. Press Enter
5. Press On Line
is
or Menu
Menus
PCL Menu
or Item
PCL Menu
Orientation
or Value
Orientation
New Value
. You will see:
PCL Menu
Orientation
. You will see:
Ready
or Menu
Menus
PCL Menu
or Item
PCL Menu
Form Length
or Value
Form Le ngt h
New Value
. You will see:
PCL Menu
Form Length
. You will see:
Ready
Table 1.12 Page 4 of 5
Display
=
=