Xerox DocuPrint N3225 System Administrator Manual page 284

Memory Modules
6-42 System Administrator Guide
Insert the memory module into the slot at an angle.
4
The memory module has a notch at one end to aid
in proper placement. The memory module will fit
only one way.
5 Rotate the memory module into its upright position until
it clicks into place.
Replace the controller board and tighten the screws by
6
hand.
7 Reattach the GFI power cord to the printer.
8 Power ON the printer.
9 Print a Configuration Sheet (see page 3-91) and confirm
that the total system memory has been incremented in
the upper left section of the Configuration Sheet.