Remove the Emissions Bracket Assembly from
10
the printer console by removing the two thumb
screws.
11
Remove the Transport Cover. Begin by lifting
the roller guard and rotating the Transport
Cover away from the edge of the printer until
the connecting tabs pull free.
12
Reattach the GFI power cord to the Printer.
Power ON the Printer.
13
Print a Configuration Sheet and confirm that
the finisher no longer appears in the upper
right section of the sheet.
If you plan to ship the finisher, remove
the Staple Cartridge before shipping.
Chapter 6: Installing and Removing Printer Options
Finisher
6-61