Table 1.30 Reset Menu functions (continued)
Menu Item and Function
Demo Mode
Place the printer in the demo mode.
The available values are:
Yes
No*
With the printer in demo mode,
different factory-installed demo pages
can be printed by using the eight
Control Panel keys to select the type
of demo page and the number of
copies.
Once Demo Mode is selected, the
printer re-enters this state
automatically every time the power is
cycled.
Demo Mode can be exited by
Powering On the N40 while holding
down the Online Key and the Enter
Key.
Keystrokes
1. Press Menu Up
or Menu
Down
until you see:
2. Press Item Up
or Item
Down
until you see:
3. Press Value Up
or Value
Down
until you see:
4. Press Enter
. You will see:
5. Press On Line
. You will see:
Chapter 1: Configuring the Printer
Using the Menu System
Display
Menus
Reset Menu
Reset Menu
Demo Mode
Demo Mode
=
Yes
Reset Menu
Demo Mode
Ready
Table 1.30 Page 2 of 4
1-103