Using the Finisher
1-124
System Administrator Guide
The finisher has an elevator that positions one of the
three output bins to receive output from the compiler bin.
The finisher home position is when Bin 2 receives output
from the compiler bin. Finisher bin selection is made
from the System Menu at the User Interface, via PCL
commands or from printer drivers.
Face-down Bin
When the finisher is installed, its transport reduces the
capacity of the printer's Face-down Bin from 500 to 300
sheets.
Job Offsetting
The finisher supports offsetting of printed jobs in all three
bins. Job offsetting is configured either via the User
Interface or through SNMP commands. Job offsetting is a
system function; it cannot be configured from the printer
drivers.
Supported Paper Sizes
All sizes of paper can be sent to the finisher except A6 and
Envelopes. Mixed sizes of paper can be sent to the finisher
bins as long as all the paper within a single job is the same
size. Mixed paper sizes within the same job cannot be
compiled and stapled. See Table 1.36 on page 1-127 for
supported paper sizes.