Print Quality Problems
Table 5.4
Print quality problems (continued)
Problem
Unfused or partially
fused image
The printed image is not
fully fused to the paper
and easily rubs off.
Wrinkled prints
Prints are wrinkled,
creased, or torn.
5-48
System Administrator Guide
Possible Cause(s)
Damp paper stock.
Heavy or unusual paper stock.
Defective Fuser.
Poor paper condition.
Paper is damp.
Fuser is at its end of life
Corrective Action(s)
Replace paper stock.
Use only approved paper/media. Refer to
the User Guide.
Replace the Fuser. Contact your dealer for
information. See "Installing the
Maintenance Kit" (page 4-9) for removal
and installation instructions.
Inspect/replace the paper stock.
Replace paper stock.
Replace the Fuser. Contact your dealer for
information. See "Installing the
Maintenance Kit" (page 4-9) for removal
and installation instructions.
Table 5.4 Page 6 of 8