Xerox DocuPrint N3225 System Administrator Manual page 210

Control Panel Messages
Table 5.2 Control Panel messages and corrective actions (continued)
Message
Load <tray>
<size> <type>
5-18 System Administrator Guide
Description/Corrective Action
This message appears on two lines. the top line contains the input tray name
(e.g., Tray 1-5, Any Tray, MBF, or Envelope Feeder). The bottom line contains
the paper size (e.g., Letter, A3, A4) and paper type (e.g., Plain, Preprinted,
Letterhead).
A tray may be out of the requested paper, or the printer is not configured for
the requested paper. The printer default settings determine whether to wait
or ignore the mismatch condition.
• If the tray is out of the requested paper, load the requested paper (size
and type) in the appropriate tray and printing continues.
• If the request is for paper not loaded in the printer (e.g., the job requests
11 x 17" paper and a tray is not configured for 11 x 17"), you are
prompted to load the requested paper in the first tray designated by the
Tray Sequence parameter.
• If you do not want to load the requested paper in the first tray in the Tray
Sequence, you can do the following:
- One of the other trays can be loaded with the requested size paper and
reconfigured via the Tray Menu to match the requested paper type.
- Press Value Up or Value Down
displaying the size and type paper in each tray. If an alternate paper is
acceptable, press Enter
paper. However, data can be lost (off the page) or not formatted
correctly when you allow a different paper size/type to be used. Trays
are searched in the order specified in the Tray Sequence item on the Tray
Menu.
to scroll through all the trays,
to cause printing to continue on the new
Table 5.2 Page 14 of 24