Verifying The Date And The Time (Main Server Only) - Avaya S8400 Installing & Configuring

Chapter 7: Postinstallation administration

Verifying the date and the time (main server only)

Use SAT commands to verify the date and time.
1.Type display time and press Enter.
display time
WARNING: Changing the date or time may impact BCMS, CDR, SCHEDULED
2. Verify that the date and the time of day are correct.
If the date and the time of day are correct, go to 5.
If the date and time of day are not correct, proceed to step 3.
3. Verify connectivity to any administered Network Time Server:
a. Using the Maintenance Web Interface, click Network Time Sync under Diagnostics.
The Network Time Sync screen confirm synchronization to any administered Network
Time Server.
b. Resolve any connection or administration issues related to the Network Time Server. If
the Network Time Server is not administered:
1. In the Maintenance Web Interface, click Server Date/Time under the Server
!
Important:
If you change the time zone, you must reboot the server.
Important:
4. Repeat this procedure, beginning with step 1.
5. Verify that the Daylight Savings Rule field is correct.
0 if this server is in a location that does not use daylight savings time
1-15 use an administered rule. The rule is administered using the SAT command
daylight-savings-rules. For more information on the daylight-savings-rules, see
rules for daylight savings time
54
Installing and Configuring the Avaya S8400 Server
DATE
Day of the Week: Friday
Day of the Month: 9
TIME
Hour: 14 Minute: 19
Daylight Savings Rule: 0
heading. Set the correct date and the correct time. Verify that the time zone is
correct.
DATE AND TIME
Month: June
Year: 2006
Second: 36 Type: Standard
on page 52.
Page 1 of 1
Setting
January 2008