Security Menu - Fujitsu PRIMERGY RX200 S4 User Manual

LAN Settings submenu
Use this submenu to set the LAN when remote controlled by the Remote Management Controller.
Item
DHCP
Local IP address
Subnet mask
Gateway address
Service LAN
Service LAN Port

7.2.11 Security Menu

The Security menu sets the security options.
Main Advanced
Setup Password:
System Password:
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Load:
Setup Prompt:
Virus Warning:
Flash Write:
table: Items on the LAN Settings Submenu
Setting
• Disabled (Initial value)
• Enabled
This item can only be set when the [DHCP] setting is "Disabled".
Sets the IP address of iRMC.
This item can only be set when the [DHCP] setting is "Disabled".
Enter the subnet mask of the onboard LAN specified in [Local IP address].
This item can only be set when the [DHCP] setting is "Disabled".
Enter the gateway address of the onboard LAN specified in [Local IP address].
Enabled (Unchangeable)
• Service (Initial value)
• Shared
PhoenixBIOS Setup Utility
Security Server Exit
Not Installed
Not Installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[Standard]
[Enabled]
[Disabled]
[Enabled]
PRIMERGY RX200 S4 User's Guide
Description
Sets whether or not to acquire LAN IP address of
iRMC from the DHCP server.
Sets whether or not to enable Service LAN.
Sets Service LAN.
Item Specific Help
191