Figure 3.22 Example Of [Partition Home] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration (Physical Partition)
2. Selecting an SB as the Home SB for the partition.
3. Click the radio button for the selected Home SB.
Remark
As long as SB is set as Home SB it is grayed out, even if it is not mounted. The radio button in the row which is
shown grayed out can be changed to the radio button on the row which is not grayed out. Once the radio button is
not grayed out, the original radio button cannot be selected again.
4. Click [Apply] button.
→ A confirmation dialogue box is displayed.
Note.
At the time of clicking the [Apply] button, if the power supply for the partition has been turned on, Home cannot be
changed. A warning dialogue box is displayed.
5. Click [OK] button to continue the process, click [Cancel] button to cancel the process.
Returns to [Partition Configuration] window.
FIGURE 3.22 Example of [Partition Home] Window
36
CA92344-0536-04